NHST-T100-EN
- 可灵活配置为常见现场总线协议、实时以太网络协议
- 与cifX Card一致的API,易于整合
- 透过网络口进行远程控制,为没有PC插槽的设备提供另一个选择
netHOST LAN 网关透过传统以太网控制现场总线或实时以太网系统,不同于cifX Card,他不需要PCI或PCIe等接口,专为仅具备以太网连接接口的工业PC和嵌入式系统设计,连接到LAN埠后,netHOST即可作为一个自主运行的、功能完善的现场总线或实时以太网主站,支持周期性和非周期性通信服务。对于Windows系统可使用动态链接库 (DLL),嵌入式系统则可使用C原始码,其 API 与 Hilscher的PC卡一致,使netHOST如同一张「可远程控制的PC卡」从而大幅简化了集成过程。
Communication controller | netX | netX 100 |
Integrated Memory | RAM | 8 MB SDRAM |
FLASH | 4 MB serial Flash | |
Memory card | Type and size | SD card, max. 2 GByte. SDHC- or SDXC-card type must not be used. |
Supply voltage | 24V | |
Maximum Current at 24 V | 130 mA | |
Power supply | Typical power consumption | 3.2 W |
Connector | Mini-COMBICON, 2-pin | |
Reverse voltage protection | yes | |
Requirement to the power supply | For UL conform usage: Device shall be supplied by an isolated voltage source | |
Configuration | Configuration software | SYCON.net、Ethernet Device Configuration Tool |
Altitude | 0 m … 2000 m | |
Dimensions (L x W x H) | 100 x 52 x 70 mm (without connector) | |
Device | Weight | appr. 150 g |
Degree of protection | IP 20 | |
Mounting | on DIN rail EN 60715 |